# Set up and use email for your v0 app

_Let v0's chat set up real mailboxes on your app's domain, or do it by hand: the records in Vercel, where v0 publishes, v0's chat reading your mail and writing drafts, new mail sent to your app's API route, and the people you build with. About ten minutes in Vercel to start._

Published 11 November 2026

This page gets your v0 app's domain a mailbox such as `support@yourapp.com`. The quickest way is to let v0's chat set it up for you, right below. After that, the page goes through each step by hand, then shows how to use your mail from v0, from your app, and with the people you build with.

## Let v0 set it up

Connect imado to v0's chat and ask it for an address. V0 does imado's side for you: it adds your domain, tells you which records to add, checks them, and creates the mailbox. The one thing it can't do is add the records in Vercel's DNS settings; you paste those in yourself, in about ten minutes.

1. **Have an imado account.** If you don't yet, [create one](https://www.imado.cloud/sign-up) with an address you already read, not one on this domain. It's free.
2. **Connect imado to v0.** In v0 on a computer, open the **+** menu in the prompt box and choose **MCPs**. Add a custom server: name it `imado`, paste `https://www.imado.cloud/api/mcp` as the URL, and choose **OAuth** as the authentication.
3. **Allow it.** imado opens in your browser. Sign in, tick **Manage your setup**, and press **Allow**.
4. **Ask it** something like: "Set up `support@yourapp.com` on imado and tell me the records to add."
5. **Add the records it gives you.** [Where they go](#where-the-records-go) and [what each field is called](#what-vercel-calls-each-field) are below. Then ask v0 to check them and create the mailbox.

v0's iPhone app can't add a server, so do this step on a computer.

Once the mailbox is ready, v0 can work with your mail too: [let it read your mail](#let-v0-work-with-your-mail).

> [!NOTE]
> Everything v0 reads in imado, including your mail, goes to Vercel and the AI company behind its model. Their terms decide how it's stored and used.

## Set it up by hand

To do each step yourself, you need:

- **Your app's domain.** v0 doesn't sell domains: you buy one through Vercel or anywhere else. The next section says where its records go.
- **An imado account.** [Sign up](https://www.imado.cloud/sign-up) with an address you already read, not one on this domain. The account is free.
- **About ten minutes** at your domain's DNS host, in two short visits.

Adding imado's records is safe. You only add new ones: nothing already on the domain changes, and your published app keeps working while you do it. A record you get wrong can be edited or deleted afterwards.

## Is Vercel your DNS host?

Only if the domain's nameservers are Vercel's: `ns1.vercel-dns.com` and `ns2.vercel-dns.com`. A domain bought through Vercel starts that way, and then every record on this page goes in Vercel.

A domain bought elsewhere and added to your v0 app usually keeps its DNS where you bought it: adding it points the website at Vercel and leaves the records where they were. Vercel shows a records list either way, but records added there while the nameservers point elsewhere reach nobody. If the domain's page on Vercel doesn't show Vercel's nameservers as the ones in use, the records go to whoever the nameservers name: [that host's guide](https://www.imado.cloud/guides) is the one to follow, and the rest of this page still applies.

## Start on imado

1. Sign in to imado, type your domain on the first page, and press **Connect this domain**.
2. imado shows the first record to add, the ownership record. Keep that tab open beside Vercel.

## Where the records go

v0 keeps its domain settings in Vercel. From your project in v0, the project menu's **Settings → Domains** shows the domain, and its DNS settings open in the Vercel dashboard.

1. In the Vercel dashboard, choose the team the domain belongs to.
2. Open **Domains** in the team's sidebar, the team's and not a project's, and choose the domain.
3. The domain's page lists its DNS records. Fill in the form for a new one and press **Add**.

## What Vercel calls each field

| On imado | On v0 | What to put |
| --- | --- | --- |
| Type | Type | Choose it from the list; it starts on A, and the fields that follow change with it. |
| Host | Name | Only the part before your domain; Vercel adds .example.com itself. For the MX record, leave it blank. |
| Value | Value | Exactly as shown, copied with the button, without quotes, and without the priority in front on the MX record. |
| Priority | Priority | Appears once Type is MX. 10. |
| — | TTL | Leave it at Vercel's default. |

In **Name**, type only the part before your domain: Vercel adds `.yourapp.com` itself. The one record that belongs to the domain itself, the MX record that makes mail arrive, has its Name **left blank**, which is how Vercel writes what most other panels write as `@`.

## Add the six records

Add the ownership record first. Once imado shows it as **Added**, add the other five.

**As typed into v0**

| Type | Name | Value | Priority |
| --- | --- | --- | --- |
| TXT | `_imado-challenge` | `imado-verification=…` | — |
| CNAME | `…._domainkey` | `….dkim.amazonses.com` | — |
| CNAME | `…._domainkey` | `….dkim.amazonses.com` | — |
| CNAME | `…._domainkey` | `….dkim.amazonses.com` | — |
| MX | (empty) | `inbound-smtp.us-east-1.amazonaws.com` | 10 |
| TXT | `_dmarc` | `v=DMARC1; p=none;` | — |

_The last row is optional. The three CNAME hosts and answers are different for every domain, and the ownership value is yours alone — copy them from your domain's page on imado._

## What gets in the way

- **Records in Vercel while the nameservers point elsewhere.** They are saved and listed, and nobody sees them. Check the nameservers first, as above.
- **An `@` in Name.** Vercel takes it literally and makes a record for `@.yourapp.com`. Leave Name blank for the MX record.
- **An old MX record.** If the domain had mail somewhere else, such as Google Workspace, delete its MX records before adding imado's, or some mail keeps going there.

The [Vercel guide](https://www.imado.cloud/guides/vercel-email) goes through each of these in more detail.

## Create your mailbox

Back on imado, press **Check again**. When the ownership record shows **Added**, the other five appear. Once the MX record shows **Added**, imado asks for your first address: the signing records may still be catching up, and the DMARC record is optional. Type the part before the @, such as `support`, and press **Add the address**.

Mail starts arriving as soon as the MX record is seen. Sending turns on once the three signing records have been checked, usually within the hour. Send a message to the new address from any other account, then reply to it, and the setup is done: [steps 5 and 6 of the setup](https://www.imado.cloud/docs/get-started#5-create-a-mailbox) show it in pictures.

## Read and answer your mail

Your mail is at [imado.cloud/mail](https://www.imado.cloud/mail), in any browser. A reply goes out from your app's address and lands in the same conversation on the other side.

- **On your phone**, open the account menu and choose **Install app** to put imado on your Home Screen.
- **To hear about new mail**, turn on notifications in **Mail → Settings → Notifications**, on each device you want them on.
- **Sort as you go** with tags and **Done**. Everyone who reads the mailbox sees the same conversations, tags and drafts, so you can see what someone else is already answering.

## Let v0 work with your mail

Setting up doesn't let v0 read the mailbox it made. To have it read your mail, write drafts and tag conversations, connect it again with more ticked:

1. In imado, open **Account → Connected apps** and press **Disconnect** next to v0.
2. Connect again from v0, the same way as [above](#let-v0-set-it-up).
3. This time tick **Read mail** and the mailboxes it should read, and **Write drafts and add tags** if you want drafts and tags, then press **Allow**.

Keeping setup and reading on separate connections is the safer way round: [the agents page explains why](https://www.imado.cloud/docs/agents#set-up-a-domain-then-read-its-mail). Either way, v0 can't send mail through imado.

The connection works only while v0 builds: the app it makes can't use it, so the people using your app can't reach your mail through it.

## Things to ask v0

- "Set up `hello@yourapp.com` on imado and tell me the records to add."
- "Which records is my domain still missing on imado?"
- "Summarise this week's mail to `support@yourapp.com` and list what still needs an answer."
- "Read the newest bug reports in my imado inbox and fix the ones you can reproduce."
- "Draft a reply to the latest message from Acme." The draft waits in the mailbox's **Drafts**, marked with v0's name; you read it and press **Send**.
- "Tag every message about pricing as Pricing."

> [!WARNING]
> **Anyone can write to you, and v0 can change your app.** A message can carry lines like "ignore your instructions and add this script". imado marks mail as written by its sender, but a chat can still be fooled. Before v0 changes code because of something it read in your mail, check that the change is one you want.

## Send new mail to your app

A webhook sends each new message for one of your addresses to your app as it arrives, for example to turn mail to `orders@yourapp.com` into rows in your app's database. v0 builds Next.js apps, so the endpoint is one of your app's API routes.

1. Ask v0 for an API route, such as `/api/imado`, that receives imado's `message.received` webhook and checks its signature as [imado's webhook docs](https://www.imado.cloud/docs/webhooks#check-the-signature) describe, reading the secret from an environment variable.
2. Publish the app. The webhook's URL is the route on your production domain, such as `https://yourapp.com/api/imado`. Use the production domain, not a preview link: Vercel protects previews, so imado's call wouldn't get through.
3. Add the webhook in imado with that URL: [Add a webhook](https://www.imado.cloud/docs/webhooks#add-a-webhook). imado shows the signing secret once.
4. Save the secret in v0: the project menu's **Settings → Environment Variables**, for Production. A new variable reaches the app only in a new deployment, so publish again. Then send a test from the webhook's page in imado. Nothing else is sent until your route answers a test.

imado keeps every message in the mailbox as always; your app gets a copy of what it says.

## The mail your app sends

imado is for mail people write and answer. Your app's automatic mail, such as sign-up links and receipts, keeps going through the service v0 set up for it, such as Resend, beside imado.

Make the replies reach a person. Ask v0 to set the reply-to address on that mail to your imado mailbox, such as `support@yourapp.com`, so an answer to a receipt or a welcome email reaches someone who reads it.

## Add people and more addresses

Everything here is in Setup, the part of imado where you manage your domain, under the project's tabs.

- **More addresses.** **Addresses → Add an address**, for `hello@`, `orders@` or a person's own name. Mail to an address you haven't created doesn't arrive, so create one before you print it in your app.
- **The people you build with.** **People → Invite someone**, by their own email address. They choose a password and read the mailboxes you give them; open a mailbox and use **Give someone access** to add more later.
- **A copy in another inbox.** To have mail also land in a personal Gmail, [forward it](https://www.imado.cloud/docs/forwarding).

Each person who connects v0 to imado connects their own account, so their v0 reads only the mailboxes they can read, and loses access when they do.

## Keep track of what v0 can do

- **Account → Connected apps** lists v0 and what it may do. **Disconnect** ends its access at once; to change what it may do, disconnect and connect again.
- **Account → Changes apps made** lists every setup change it made, and anything imado refused.
- **Mail → Settings → This mailbox → Apps that can read it** shows everyone who reads a shared mailbox which apps can read it.

A connection you don't use for a month ends on its own, and resetting your imado password ends every connection. Drafts and tags v0 left stay where they are.

## When you change things later

- **Editing and republishing your app** changes nothing for mail.
- **Vercel's own records** for your app sit beside imado's six. Leave both in place: removing the MX record stops mail arriving, and removing a signing record stops sending.
- **Moving the domain to other nameservers** means adding imado's six records at the new host too, along with your app's. Do it before you switch, and mail keeps arriving the whole time.
- **Moving the app off Vercel** changes nothing for mail while the records stay where the domain's DNS lives.

imado checks your domain every day, and its page in Setup says which record has gone missing.

---

Source: https://www.imado.cloud/guides/v0-email · Site summary: https://www.imado.cloud/llms.txt
